MONTANA CANS- TECH ACETONE
No se pudo cargar la disponibilidad para recoger
Montana ACETONE spray also known as CAP CLEANER is a universal thinner and cleaning agent that is transparent in color. Removes residues of paint, lacquer, silicone, wax, tar, de-greasing. Suitable for pre-treatment before painting objects or to remove paint residues after painting. Can be used on porcelain, glass, ceramics, blank metals and others. Evaporates quickly without leaving residues. Non-corrosive. Always test spray on a non-visible area to check for any reactions to lacquer or paint, especially when used on plastic grounds as it may etch synthetic surfaces. Perfect when used as CAP CLEANER to clean used and clocked nozzles. Put used nozzles on the ACETONE CAN and clean by spraying. Test spray on a non-visible area to check for any reactions to lacquer or paint.
WHAT IS MONTANA ACETONE SPRAY?
MONTANA ACETONE SPRAY IS A UNIVERSAL THINNER AND CLEANING AGENT THAT IS TRANSPARENT IN COLOR. IT WAS ALSO PREVIOUSLY KNOWN AS €ŒCAP CLEANER€.
WHAT DO I USE IT FOR?
Montana ACETONE spray has many possible uses. As a commonly used thinning element in solvent based paints, it can be used to thin oil/solvent based paints. It cleans paint residue, lacquer, silicone, wax and tar from surfaces. It can also be used as a de-greaser.
WHAT CAN I USE IT ON?
Montana ACETONE spray can be used on porcelain, glass, ceramics, blank metals and other surfaces. Please note marking or etching could occur on surface that are not resistant to solvents. Always trial on non visible area to check compatibility.
CAN IT ALSO CLEAN NOZZLES?
Montana ACETONE spray can be used as a cleaner of spray can nozzles (otherwise know as „caps“). Simply apply freshly used cap to the ACETONE spray can before paint in/on it completely dry and trigger till acetone flows smoothly and cleanly. It may be possible to clear completely blocked caps by soaking in a acetone for 4-6 hours, to try and remove dry paint.
CAN I CLEAN BRUSHES WITH IT?
Montana ACETONE spray can clean brushes that are are coated in wet oil or solvent based coatings. Please note that hair curling may occur to lesser quality brushes.
HOW LONG DOES MONTANA ACETONE SPRAY TAKE TO DRY?
Montana ACETONE spray dries rapidly between 1-3 minutes depending on the amount applied and surfaces applied to.
IS THERE A CREATIVE WAY TO USE ACETONE SPRAY?
Montana ACETONE spray can be used as a creating tool and not just as a cleaning agent. When applied to wet or not cured paints, the ACETONE spray can re-activate and break down pigment based materials to function as a thinning agent, such as water with water color paints. When the substrate is elevated or turned while paint is „open“, creative drips, mixing or marks can be made. Please test on non visible areas of materials to check for compatibility.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.”